CONVERSIONS

CONVERSION BUILD
Peper Harow Horseboxes regularly has conversion builds underway using a carefully chosen 7.5 ton chassis usually an Iveco or a DAF with a reasonably unmarked and tidy body with good headroom and width. A smart aerofoil kit is fitted to provide a neat aerodynamic fit to the body and easy engine access, making a strong and practical basis for a horsebox conversion.
Click for the Plan View Layout

  • Smart practical and easy to drive
  • Easy engine access fully tilt cabs on aerofoil models
    and luton design models
  • You choose your ideal split of area between horse and living
  • Choose from a list of extras to make it your own, or keep it simple
  • Choose from 16 ft to 20 ft lenghts of body to suit your needs

Side skirts and locker space are added, the body divided up to roughly 2/3rds horse section and 1/3 rd day living /grooms/tack area. The back panel of the cab is removed to give access to the grooms area, but leaving a full tilt cab facility for mechanical access.

A new alloy floor in the horse area will be fitted with an overlay of rubber mats, the ramp has under-slung springs and tough non slip covering plus top hat grips, two white GRP loading doors, and 2 or 3 galvanised, padded, telescopic partitions with rubber flaps that can be positioned to suit your load.

The walls have a lining of stockboard to a height of 4ft with a white clean surface above, and with windows in front and behind the horse it is bright and well ventilated.

The roof is also white lined and fitted with interior lights, tie rings inside and out etc.

The front area can be left unfitted or fully furnished with sink and cooker unit, and a tack/loo cubical, seating and table etc, it’s up to you, your budget or your needs.

The grooms area can be smaller to give more horse area ideal hunting or polo.

The boxes come spray painted to a high specification and fitted with tie rings outside.

A spare wheel and a battery isolator is fitted for you and the chassis will have a service and an annual test certificate.

PRICE
Cost of rear load 3 horse conversion is from £15,995 +VAT inc paint, plus the chassis 2004 to 2005
7.5 ton Daf LF or Iveco 75E/17 typically £7,500 to £8,950 +VAT,
the cost of extras for the living area will be quoted for according to your specification.

Idea for living area


Cab access

Horse area

Paint finishes and designs


What our customers have to say:

Testimonials

As part of our policy to continually update the product range, we reserve the right to modify any specifications as may prove necessary. We will be pleased to answer any queries on this matter and confirm current specifications. All dimensions and weights are approximate and are intended for guidance only.

Contact: phone or email

Julia McNeill

01483 416555

07973 329 617

julia.mcneill@phhb.co.uk

 

Adam McNeill

07970 498 782

adam.mcneill@phhb.co.uk

 

Find us on Facebook

Testimonials

7 years ago I was looking for a 2 horse lorry. I came across Peper Harowhorse boxes advert and gave them a call. I spoke to Julia, (who is very helpful) explained to her what I was looking for and after trying several Chassis and Probably Julia's patience , they built a super Trophy Twin box for me. For 6 years this lorry never let me down , and was admired at shows. Comments often made about how good the horse area was. Well after 6 very happy years travelling around with my lovely Mercedes 814d Trophy Twin , I decided it was time to upgrade. So without hesitation I called Julia to ask if they would like to build me a new luxury, slightly bigger version of the Trophy Twin.

Beverley Brown.

click to read more