GREAT CONDITION 7.5 TONNE CONVERSION BUILT BY PHHB

  • 2006 Iveco chassis with full tile cab
  • Low mileage – only 105,000
  • Compact size – only 6.8m total length
  • Sleeping for 3
  • Horses travel herringbone
  • Full aluminium plank floor and easy to use ramp
  • Supplied with new MOT

£ SOLD

Chassis Specification

This conversion body was built by Peper Harow Horse Boxes in 2016 on a 2006 reg Iveco 75e17 with full tilt cab for easy engine access.  With only 105,000 miles this manual chassis has 3 seats in the cab, will come with a new MOT and is in great condition, having been looked after by us. The cab has electric windows, cruise control, a CD player, 2 camera CCTV and a battery isolation switch with a cut through leading into the living area.

Living Area

The good size living area is accessed via the cab cut through, or from the groom’s door with roll out steps from the outside.  It contains an L shaped bench seat wrapped around a central table.  The larger bench seat converts into a bed for 2 people and there is also a pull own bed on the cab wall to sleep another person.  There are two large windows for light and ventilation and a 240v plug in.  The kitchen area has wooden cupboards with a 3 burner glass top hob and sink with cold running water.  A solid door leads directly into the horse area.

Storage

Good size tack locker accessed from outside and protruding into the living area contains 2 saddle racks, 2 bridle racks and additional coat hooks.  This also stores the gas cylinder and water tank.
A full size wardrobe is part of the kitchen cupboard run, as well as an under worktop cupboard.
Two rug racks are mounted high on the living walls.
There is also under bench storage in the living.

Horse Area

The horse area has 3 large windows, 3 vent windows and 2 roof vents, along with plenty of internal and external tie rings.  It is accessed via a ramp at the rear of the vehicle which is easy to use with runners and carpet.  There are two partitions both which are both padded with weave headboards to travel your horses herringbone.  One partition has a rubber flap at the bottom, one has a solid wooden bottom to allow you to create 3 stalls or 2 stalls with a storage stall.  The floor is aluminium plank with a heavy duty rubber mat covering and there is a horse wash down accessible from an external skirt locker.

Safety Features

Pads in horse area
No tack lockers in horse area
Fire extinguisher
Smoke and carbon monoxide detector
CCTV – with one camera in the horse area and one as a reversing camera

Weights & Dimensions

Payload: 2,000kg – to be confirmed by weighbridge
Total external length: 680cm / 22’ 4”

Horse area:

  • Height – 220cm / 7’ 3″
  • Width (bum to nose) – 224cm / 7’ 4”
  • Length – 244cm / 8’ 

Living area:

  • Length – 236cm / 7’ 9”
  • Width – 227cm / 7’ 5″

Additional Information

For sale on behalf of a client so no warranty implied or given but all inspections welcome.

Viewing in Guildford, Surrey
01483416555
07970498782